• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Due to inverter technology, energy efficiency is higher than the conventional machines.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Multi process welding; MIG/MAG, Stick Electrode, Carbon Gauging and TIG welding.

• No Spatter welding due to advanced electronically optimized inductance and pulsing functions. Excellent welding characteristics for all methods.

• 3 Operating Modes; "Synergic, Classic, Smart". Conventional. With these options a welder can adapt from basic to synergic welding easily.

• ONE LCD for ALL parameter selection; Wire type, wire diameter, gas type and thickness of the base metal for Synergic Welding and Soft Start, Pre-Gas, Post-Gas, Burn-Back, Crater Filling timer settings as GENERAL SETTINGS.

• 100 Different JOB and 2/4/6 Trigger mode selection from TORCH.

• Industry 4.0 features such as; OEE, Arc-On Time reporting, WP setting/controlling/reporting, Barcode and RF Card reading. (Optional)

• Separate Wire Feeder models are available.

• 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• ROBOT connectivity due to very stable arc and advanced communication possibilities.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.

• ø300 mm, ø270 mm and ø200 mm diameter spools and drums of any size can be used.

• 24V AC outlet for CO2 gas heater.

• Stable welding current without loss of performance due to electric line fluctuations or with long welding and electrical cables.

• Built in gas cylinder platform with large wheels to ease mobility in workshops. Multipurpose drawer replaces water cooling unit if it is not needed.

• Intelligent control of temperature reduces energy consumption and extends the fan and machine life. (SmartFan)

• For water-cooled (W) models, provides powerful water cooling up to 50 m distance & 40ºC ambient temperature.

• Submerged arc welding head can be coupled easily. (Option)

• Standard accessories come with the machine.

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Due to inverter technology, energy efficiency is higher than the conventional machines.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Multi process welding; MIG/MAG, Stick Electrode, Carbon Gauging and TIG welding.

• No Spatter welding due to advanced electronically optimized inductance and pulsing functions. Excellent welding characteristics for all methods.

• 3 Operating Modes; "Synergic, Classic, Smart". With these options a welder can adapt from basic to synergic welding easily.

• ONE LCD for ALL parameter selection; Wire type, wire diameter, gas type and thickness of the base metal for Synergic Welding and Soft Start, Pre-Gas, Post-Gas, Burn-Back, Crater Filling timer settings as GENERAL SETTINGS.

• 2/4 Trigger mode selection from TORCH.

• Industry 4.0 features such as; OEE, Arc-On Time reporting, WP setting/controlling/reporting, Barcode and RF Card reading. (Optional)

• Separate Wire Feeder models are available.

• 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• ROBOT connectivity due to very stable arc and advanced communication possibilities.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.

• ø300 mm, ø270 mm and ø200 mm diameter spools and drums of any size can be used.

• 24V AC outlet for CO2 gas heater.

• Stable welding current without loss of performance due to electric line fluctuations or with long welding and electrical cables.

• Built in gas cylinder platform with large wheels to ease mobility in workshops. Multipurpose drawer replaces water cooling unit if it is not needed.

• Intelligent control of temperature reduces energy consumption and extends the fan and machine life. (SmartFan)

• Submerged arc welding head can be coupled easily. (Option)

• Standard accessories come with the machine.

• Operates with 3 Phase 400 V 50/60 Hz networks & generators. Tolerates voltage fluctuations upto %15.

• Excellent welding characteristics with all types of solid and flux cored wires.

• Constant Current & Constant Voltage (CC/CV). Power sources enabling operators to use stick electrode and carbon gauging processes as well as the MIG/MAG process.

• Ready to weld with any type of ROBOT. According to the robot type, digital & analog communication is possible.

• magNET ready: Welding and environmental data is stored in real time scale. While certain values are directly read on the LCD panel, more information like OEE and WP/Quality information could be monitored and stored on the magNET platform (Optional).

• 3 Adjustment Modes; "Synergic, Classic, Smart". makes it especially easy for operators who used to weld with conventional equipment.

• Synergic feature for optimum welding parameter selection through the LCD menu by Wire Type, Wire Size, Gas Type, and Thickness selection.

• Trigger Mode (2/4), Soft Start for spatter free arc ignition, Pre-Gas, Post-Gas and Crater Filling for automation, Burn-Back time for anti sticking and Spot On/Off timers can be set through the LCD panel.

• Welding Voltage, Welding Current or Wire Feeding Speed, according to the selected mode can be set or fine tuned by potentiometers and confortably monitored by separate big digital displays.

• The 2 way button for Inching and Gas Purge is inside the wire feeder compartment.

• Separate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.

• The 4-wheel drive system assures good feedablity with longer torches and less deformation of delicate wires like aluminum and flux cored wires.

• Standard hose between wire feeder box and the base machine is 5m long. Upon request this could be extended up to 30m.

• Built-in trolly with gas bottle platform and 24V DC electric socket for CO gas heater.

• Water cooling unit is at the base of the trolly and it is powerful enough to support in warm climates and long harness.

• Outer case is made out of steel and coated with electrostatic powder painting for a corroson free longer service life.

• Protection Class is IP21S.

• Protected against missing phase or excessvely high or low line voltage.

• Fan cooled and protected against overheating.

• Smart Cooling enables all turning parts, like fans and pump motors, work according to the heating levels. This function signifciantly reduces nose levels, dust accumulation inside of the equipment, energy consumption and service needs.

• Operates with 3 Phase 400 V 50/60 Hz networks & generators. Tolerates voltage fluctuations upto %15.

• Excellent welding characteristics with all types of solid and flux cored wires.

• While ID300M has a Constant Voltage (CV) power source for MIG/MAG process, ID400MW & ID500MW has Constant Current & Constant Voltage (CC/CV) power sources enabling operators to use stick electrode and carbon gauging processes as well as the MIG/MAG process.

• ID400MW & ID500MW are ready to weld with any type of ROBOT. According to the robot type, digital & analog communication is possible.

• magNET ready: Welding and environmental data is stored in real time scale. While certain values are directly read on the LCD panel, more information like OEE and WP/Quality information could be monitored and stored on the magNET platform (Optional).

• 3 Adjustment Modes; "Synergic, Classic, Smart" makes it especially easy for operators who used to weld with conventional equipment.

• Synergic feature for optimum welding parameter selection through the LCD menu by Wire Type, Wire Size, Gas Type, and Thickness selection.

• Trigger Mode (2/4), Soft Start for spatter free arc ignition, Pre-Gas, Post-Gas and Crater Filling for automation, Burn-Back time for anti sticking and Spot On/O timers can be set through the LCD panel.

• Welding Voltage, Welding Current or Wire Feeding Speed, according to the selected mode can be set or fine tuned by potentiometers and compfortably monitored by separate big digital displays.

• The 2 way button for Inchng and Gas Purge is inside the wire feeder compartment.

• Separate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.

• The 4-wheel drive system assures good feedablity with longer torches and less deformation of delicate wires like aluminum and flux cored wires.

• Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended up to 30m.

• Built-in trolly wth gas bottle platform and 24V DC electric socket for CO gas heater.

• Water cooling unit si at the base of the trolly and it is powerful enough to support in warm climates and long harness. (MW models)

• For air cooled models a large drawer is placed instead of the water cooling unit for welder's necessities. (M models)

• Outer case is made out of steel and coated with electrostatic powder painting for a corroson free longer service life.

• Protection Class is IP21S.

• Protected against missing phase or excessvely high or low line voltage.

• Fan cooled and protected against overheating.

• Smart Cooling enables all turning parts, like fans and pump motors, work according to the heating levels. This function signifciantly reduces nose levels, dust accumulation inside of the equipment, energy consumption and service needs.

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Separate wire feeding units are standard. Closed Cabinet and Small-D200 (5Kg) Spool Wire Feeder.

• Powerful Digital Displays are closer to the welder.

• 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.

• Wire feed speed adjustment, 2/4 trigger selection, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer adjustments. During welding, voltage and current are monitored on digital displays.

• Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.

• Manual wire feeding & gas valve buttons are in the wire feeding cabinet.

• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.

• 220V AC outlet for CO2 gas heater.

• Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.

• Built in gas cylinder platform with large wheels to ease mobility in workshops.

• Standard accessories come with the machine.

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Separate wire feeding units are standard. Open Cabinet and Smaller Wire Feeding Units for 5 kg (D200) spools options are available.

• 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.

• Wire feed speed and 2/4 trigger adjustments are on the front panel, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings, manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.

• Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.

• Digital displays on the power source for adjusting and monitoring of welding parameters.

• Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.

• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.

• 220V AC outlet for CO2 gas heater.

• Built in gas cylinder platform with large wheels to ease mobility in workshops.

• Fan cooling and thermal protection against overheating.

• Standard accessories come with the machine.

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Separate wire feeding units are standard. Open Cabinet and Smaller Wire Feeding Units for 5 kg (D200) spools options are available.

• 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.

• Wire feed speed and 2/4 trigger adjustments are on the front panel, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings, manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.

• Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.

• Digital displays on the power source for adjusting and monitoring of welding parameters.

• Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.

• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.

• 220V AC outlet for CO2 gas heater.

• Built in gas cylinder platform with large wheels to ease mobility in workshops.

• Fan cooling and thermal protection against overheating.

• For water-cooled (W) models, provides powerful water cooling up to 50 m distance and 40ºC ambient temperature.

• Standard accessories come with the machine.

• Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.

• Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.

• Separate wire feeding units are standard. Open Cabinet and Smaller Wire Feeding Units for 5 kg (D200) spools options are available.

• 4 roll drive system offers good feedability with long torches and offers less deformation on soft wires such as aluminum and flux cored wires.

• The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request.

• Optimum welding parameters can be obtained from the printed table inside of the wire feed cover.

• Wire feed speed and 2/4 trigger adjustments are on the front panel, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings, manual wire feeding & gas valve buttons are inside of the wire feeding cabinet.

• Welding voltage is adjusted from the course and fine switches; increments are optimized to obtain welding parameters with lowest spatter levels.

• Digital displays on the power source for adjusting and monitoring of welding parameters.

• Multiple workpiece connections (Inductance outlets) enables optimum parameter adjustment for low spatter welding.

• ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.

• 220V AC outlet for CO2 gas heater.

• Built in gas cylinder platform with large wheels to ease mobility in workshops.

• Fan cooling and thermal protection against overheating.

• For water-cooled (W) models, provides powerful water cooling up to 50 m distance and 40ºC ambient temperature.

• Standard accessories come with the machine.